Easy-to-Follow Installation Guidelines for Driving LED Light Bars

Driving LED light bars are an essential part of any 4WD car. Without them, traversing dark bush roads and uneven terrain can be quite dangerous and extra challenging. So before you head out, make sure that you equip your 4x4 with reliable and heavy duty driving lights to ensure your safety and enjoyment.

Things to remember about installing LEDs

After purchasing the appropriate LED lighting equipment for your vehicle, the next thing you need to do is to make sure that it is installed properly. Otherwise, you might experience certain problems with your lighting device or the LED might not be able to perform to the best of its ability. Here are some installation guidelines to help you out.

1. Consider professional help. If this is your first time installing an LED light bar in Australia, you should consider seeking professional help. For a small fee, you can hire the services of professional installers to ensure that the lighting equipment are fitted and connected to your vehicle properly.

2. Check state regulations. Don’t want to hire a professional installer? Don’t worry; you can install the LEDs yourself. But before you do, make sure to check with state regulations to avoid being flagged down or fined by the authorities. For instance, in Queensland, driving lights should always be installed in pairs. If not, the lighting equipment should be placed in the centre and front of your car. Also, LEDs should be installed in a way that the light they generate don’t cause discomfort to road users either directly or by reflection.

3. Consider buying a harness. To make it much easier for you to install the light bar, consider purchasing a power harness in case the lighting device doesn’t have any. The harness allows you to control the power supply to your lighting equipment with just a simple push of a button. And depending on the voltage, it also makes it much easier for you to install additional lighting devices.

4. Test the connection. Don’t go driving without testing the LEDs you have just installed, especially if you’re planning to go touring. Test the LEDs if they are working by turning on the ignition and switching on the high beam. If the light bar didn’t work, you should switch it off and re-check the fuse and all wiring connections. Then, turn it on again to see if the LEDs are working properly.

Looking for quality LED bar light 4x4? Then visit us at Elinz Electronics today.