What is the IP Rating on an LED Light Bar?

In recent times, plenty of LED light bar ip  is equipped with waterproof and it typically comes with a specific type of coding system implemented by the International Electro Technical Commission called the Ingress Protection or IP rating. Here are just a few facts that might interest you in regards to this rating system:

The Basics of IP Rating for an LED Light Bar

This is a standard rating system that is typically given to an electronic product, which measures the range of dust and water proofing of the device. It will be able to successfully identify the amount of dust or water a device could withstand before it arrives at its tipping point.

Generally, the IP rating is composed of two numerical figures. The first number corresponds to the level of resistance the device could take on dusts. The second digit then signifies the level of resistance the LED light bars has for water. Combined, this data will be able to inform the consumer of the capabilities of your devices and how it could withstand the harshness of the elements.

In general the dust proofing numerical length only has six levels, while water proofing has eight levels. These numbers could be defined as follow:

The first characteristic of the degree of protection against solid objects or dust proofing:

No. 0: There is no protection available in the device for this.

No. 1: The device is protected against a solid object that is greater than 50mm (i.e. a person’s hand).

No. 2: The device can handle solid objects that are greater than 12.5mm (i.e. a person’s finger).

No. 3: The device is protected enough to be able to withstand objects that greater than 2.5mm (i.e. wire)

No. 4: The device’s protective shell is able to withstand objects that are greater than 1.0 (i.e. a very thin strap).

No. 5: The device is well protected from objects that entry of dust or any other particles that could cause harm to it.

No. 6: The device is secured enough to warrant no entry of any form of particles.

The second characteristic deals with the ingress of water and has eight levels of measurement:

No. 0: No protection whatsoever.

No. 1: The device is protected against dripping water.

No. 2: The device is protected against when it is tilted up to 15 degrees.

No. 3: The device is well protected from spraying water at 60 degrees angle.

No. 4: The device is protected from splashing water from any direction.

No. 5: The device is secured against jet stream of water from any direction.

No. 6: The device is protected enough to be secured against intense heavy amount of water (i.e. waves from the ocean).

No. 7: The device is secured enough to withstand short immersions in water.

No. 8: The device is well-protected enough to handle deep and long periods of water immersion.

Those are just some of the information you need to read and understand the IP ratings of LED lightbars in Australia. If you want to see a great selection of light bars for your use, definitely have a look around the website.

The Awesomeness of Cosmoblaze’s LED Light Bars

Do you like going on an adventure with your family in your vehicle? Do you like to go on trails in the Australian outback or go on hikes in the wilderness? Then installing Cosmoblaze LED light bars on your vehicle can certainly be a powerful addition to your vehicle’s functionality.

What Makes Cosmoblaze’s LED Light Bars Special?

No. 1: Built with high-grade materials. The fantastic CREE LED light bar are all created with durability in mind, which is why it features an amazing extruded 6063 aluminium housing, cast alloy leg mount, and tough polycarbonate lens that could withstand different climates and environment. You wont have to worry about taking a drive in the wildest parts of Australia because this light bar is highly protected from the inside and out.

No. 2: Powerful and bright. Cosmoblaze’s LED light bar is fully equipped with a high quality CREE LED chips that are made from the United States of America. This means that the lumens for this particular brand of lighting are powerful enough to shed illumination in dark terrains. It features a really wide colour spectrum that produces the whitest of light to make it easier for users to travel easily.

No. 3: Two different lighting outputs. Most of Cosmoblaze’s light bars have features that could access both Flood and Spot lighting. Flood lighting is a lighting output that provides a wider scope, which means that one could easily see practically even the periphery of the vehicle. Spotlight concentrates on a particular portion of the road, which is shed by an intense amount of light. This light bar has a combination of both that gives it a more powerful output compared to other kinds of automobile lighting systems.

No. 4: It features one of the best proofing in an LED light bar. Every component in this particular light bar series has been carefully crafted to be rustproof, shockproof, and waterproof. The components of the light bars aren’t easily tainted by corrosion since it majority of it is composed of aluminium. The case and lenses are created to withstand a high degree of impact as mentioned earlier. Then it has the IP69 waterproof rating so it isn’t easily affected by rain.

With these features in mind, you can definitely tell that Cosmoblaze is definitely one of the premier light bar creators out there. These devices are handles with such thought and care that customers can’t help but rave about it. So what are you waiting for? Travel in the night easily with these on your car.

3 Tips for Finding Quality LED Bar Light 4WD

It can prove to be a little difficult to sift through various options with so many manufacturers of LED bar light 4WD, even if you have a basic understanding of the different electronic, mechanical, and operational features that are pretty basic for light bars. So how can you identify the quality light bars from the cheap ones? Here are some basic tips you can use in order to get a high quality LED light bar.

Important Tips to Consider Before Buying a LED Bar Light 4WD

Tip No. 1: Always check the reviews for the best LED light bar 4x4. It can prove difficult to physically check a product online, which is why you should keep your eyes open for customer reviews. It is pretty typical for an online store to have a customer feedback portion on the product’s page, so be sure to check out what the general opinion regarding an LED light bar.

Tip No. 2: Check the length of warranty and the warranty terms of the product. This is especially important because cheap LED light bar 4x4 does not provide a warranty or the terms are suspiciously unusual. High quality products have a sensible warranty period and terms, which will give you the impression that they are deeply invested in customer satisfaction.

You can check the specification page of the product if there’s an inclusive warranty and if it is not clearly stated you should try to contact a customer service representative from the online seller and ask them about it.

Tip No. 3: Always check the International Protection or IP rating of a product. For those that are not aware, the IP marking classifies and rates the degree of protection a material provides against any intrusion such as water, dirt, or dust for the product. The highest rating for this is the IP69, however, there’s only a handful of LED light bars that could achieve this. This is why you should a light bar that has an IP65 rating as the minimum.

LED light bars Australia are not created equally and there are so many differences in the make and materials for each product. Try to consider these tips in order to find a quality light bar product that will suit your needs.

How to Distinguish Lumens and Watts of LED Lights Bars

LED light bars have proven itself to be a handy tool for any driver, especially off road enthusiasts. This handy device can be installed to a vehicle and could add a much more powerful lighting that could help you see better during night time travels. It can provide light in places that normal headlights can’t reach. How does the light bar contribute such powerful light? It all boils down to the amount of lumen it has.

The Difference Between Watts and Lumens on LED Light Bars

First of all it is important to distinguish between the difference of Lumens and Watts and how it relates to an LED light bar. Watts is how people measure the amount of electricity a lighting device requires to produce light. It is the determining factor of how much electric energy the device is capable of handling to produce the light that is essential in a light bar.

Lumens, on the other hand, is the scientific way of determining the quantity and quality of brightness of a light. It is the basic unit that gauges how bright the light bar is, which could help you determine how much light to suit your needs. Measuring this is a little bit complex and more vague than determining the length and weight of an object, which is why comparison is the controlling factor on how bright a light bar is.

How Does This Relate to LED light bars?

People have grown accustomed to think about the brightness of lighting device via Watts. If you go out to the hardware store to purchase a light bulb, you would automatically look at its wattage. A 100w bulb is brighter than a 60w light bulb. The problem with this means of measurement is that it typically only works for incandescent type of light globes.

Now that the dawn of modern light technologies gave birth to Light Emitting Diodes or LED, the way people measure brightness have changes drastically. In perspective, LED can emit the same amount of lumens for a fraction of the watts. This means that LED are no longer required to use the same electricity as an incandescent light globe.

That is how to determine the difference between the importance of lumens and watts. If you want to purchase an LED light bar Australia, feel free to explore the website.

How to Protect Your LED Light Bar from Extreme Heat

While an LED light bar doesn't produce as much heat as an ordinary automotive lighting device, it doesn't necessarily mean that it won't suffer from a potential overheating. LEDs do produce heat, but not in the form of infrared radiation that ordinary lighting devices generate. Instead, the heat they produce is within the light bars themselves because of the presence of semiconductors that are needed by LED devices to generate light.

What You Should Understand about Heat and LEDs

An LED light bar is expected to last at least 50,000 hours. Unlike ordinary lighting devices, it doesn't suddenly die or burn out. When it is almost at the end of its lifespan, you'll easily notice because the light it produces becomes dimmer and dimmer.

While LEDs last longer than most lighting devices, heat can significantly affect their life span. Elevated temperatures can lead to the rapid deterioration of the LEDs, which then results in the light that the LEDs produce to dim much faster than expected. If heat is not dispersed properly, it is very likely that you'll enjoy just half of the LEDs' expected 50,000 hour lifespan.

Protect Your LED Light Bar from Heat

To ensure that your LED light bars in Australia will be able to fulfil its duty up to its expected lifespan, here are some tips you should follow:

1. Ensure that the light bar has a reliable heat sink

Heat sinks provide LED light bars with efficient thermal management. What they do basically is to disperse the heat generated by the semiconductors to prevent the light bar from burning out from within. Therefore, before you settle for a particular light bar, ensure that it has a working heat sink. It doesn't matter whether the heat sink is made of metal, heat pipe, or other materials. What's important is that it can help disperse heat properly.

2. Don't obstruct the vents of the light bar

To ensure proper thermal management, see to it that you don't install the light bar in a location where its fins or "breath vents" are obstructed. This way, the hot air from the inside of the light bar can go out freely and won't be trapped within the device.

3. Clean your light bar

Dirt and dust that accumulate on your light bar can clog its vents. Therefore, make sure to wipe down your light bar from time to time. Pay special attention to the back of the lighting device, especially if you have recently driven your vehicle on a dusty road.

Heat is one of the biggest enemies of LED light bars. As such, be sure to keep yours cool at all times to make the most of its unique capabilities.