3 Tips for Finding Quality LED Bar Light 4WD

It can prove to be a little difficult to sift through various options with so many manufacturers of LED bar light 4WD, even if you have a basic understanding of the different electronic, mechanical, and operational features that are pretty basic for light bars. So how can you identify the quality light bars from the cheap ones? Here are some basic tips you can use in order to get a high quality LED light bar.

Important Tips to Consider Before Buying a LED Bar Light 4WD

Tip No. 1: Always check the reviews for the best LED light bar 4x4. It can prove difficult to physically check a product online, which is why you should keep your eyes open for customer reviews. It is pretty typical for an online store to have a customer feedback portion on the product’s page, so be sure to check out what the general opinion regarding an LED light bar.

Tip No. 2: Check the length of warranty and the warranty terms of the product. This is especially important because cheap LED light bar 4x4 does not provide a warranty or the terms are suspiciously unusual. High quality products have a sensible warranty period and terms, which will give you the impression that they are deeply invested in customer satisfaction.

You can check the specification page of the product if there’s an inclusive warranty and if it is not clearly stated you should try to contact a customer service representative from the online seller and ask them about it.

Tip No. 3: Always check the International Protection or IP rating of a product. For those that are not aware, the IP marking classifies and rates the degree of protection a material provides against any intrusion such as water, dirt, or dust for the product. The highest rating for this is the IP69, however, there’s only a handful of LED light bars that could achieve this. This is why you should a light bar that has an IP65 rating as the minimum.

LED light bars Australia are not created equally and there are so many differences in the make and materials for each product. Try to consider these tips in order to find a quality light bar product that will suit your needs.

How to Distinguish Lumens and Watts of LED Lights Bars

LED light bars have proven itself to be a handy tool for any driver, especially off road enthusiasts. This handy device can be installed to a vehicle and could add a much more powerful lighting that could help you see better during night time travels. It can provide light in places that normal headlights can’t reach. How does the light bar contribute such powerful light? It all boils down to the amount of lumen it has.

The Difference Between Watts and Lumens on LED Light Bars

First of all it is important to distinguish between the difference of Lumens and Watts and how it relates to an LED light bar. Watts is how people measure the amount of electricity a lighting device requires to produce light. It is the determining factor of how much electric energy the device is capable of handling to produce the light that is essential in a light bar.

Lumens, on the other hand, is the scientific way of determining the quantity and quality of brightness of a light. It is the basic unit that gauges how bright the light bar is, which could help you determine how much light to suit your needs. Measuring this is a little bit complex and more vague than determining the length and weight of an object, which is why comparison is the controlling factor on how bright a light bar is.

How Does This Relate to LED light bars?

People have grown accustomed to think about the brightness of lighting device via Watts. If you go out to the hardware store to purchase a light bulb, you would automatically look at its wattage. A 100w bulb is brighter than a 60w light bulb. The problem with this means of measurement is that it typically only works for incandescent type of light globes.

Now that the dawn of modern light technologies gave birth to Light Emitting Diodes or LED, the way people measure brightness have changes drastically. In perspective, LED can emit the same amount of lumens for a fraction of the watts. This means that LED are no longer required to use the same electricity as an incandescent light globe.

That is how to determine the difference between the importance of lumens and watts. If you want to purchase an LED light bar Australia, feel free to explore the website.

How to Protect Your LED Light Bar from Extreme Heat

While an LED light bar doesn't produce as much heat as an ordinary automotive lighting device, it doesn't necessarily mean that it won't suffer from a potential overheating. LEDs do produce heat, but not in the form of infrared radiation that ordinary lighting devices generate. Instead, the heat they produce is within the light bars themselves because of the presence of semiconductors that are needed by LED devices to generate light.

What You Should Understand about Heat and LEDs

An LED light bar is expected to last at least 50,000 hours. Unlike ordinary lighting devices, it doesn't suddenly die or burn out. When it is almost at the end of its lifespan, you'll easily notice because the light it produces becomes dimmer and dimmer.

While LEDs last longer than most lighting devices, heat can significantly affect their life span. Elevated temperatures can lead to the rapid deterioration of the LEDs, which then results in the light that the LEDs produce to dim much faster than expected. If heat is not dispersed properly, it is very likely that you'll enjoy just half of the LEDs' expected 50,000 hour lifespan.

Protect Your LED Light Bar from Heat

To ensure that your LED light bars in Australia will be able to fulfil its duty up to its expected lifespan, here are some tips you should follow:

1. Ensure that the light bar has a reliable heat sink

Heat sinks provide LED light bars with efficient thermal management. What they do basically is to disperse the heat generated by the semiconductors to prevent the light bar from burning out from within. Therefore, before you settle for a particular light bar, ensure that it has a working heat sink. It doesn't matter whether the heat sink is made of metal, heat pipe, or other materials. What's important is that it can help disperse heat properly.

2. Don't obstruct the vents of the light bar

To ensure proper thermal management, see to it that you don't install the light bar in a location where its fins or "breath vents" are obstructed. This way, the hot air from the inside of the light bar can go out freely and won't be trapped within the device.

3. Clean your light bar

Dirt and dust that accumulate on your light bar can clog its vents. Therefore, make sure to wipe down your light bar from time to time. Pay special attention to the back of the lighting device, especially if you have recently driven your vehicle on a dusty road.

Heat is one of the biggest enemies of LED light bars. As such, be sure to keep yours cool at all times to make the most of its unique capabilities.

4 Reasons to Consider LED Light Bars with a Curve

Off road driving is more challenging than on road driving. With the roads unpaved and uneven, they bring more strain to your vehicle. But if you think driving off road at day is difficult, try driving on uneven terrain at night. Not only do you have to carefully manoeuvre your 4X4, you also have to watch out for objects both ahead of you and on the sides of the road. For this reason is good to invest in quality LED light bars to help you navigate your way to safety.

Give Curved LED Light Bars a Shot

Today, you can find LED light bars in many sizes. Depending on the type of application you have in mind, you can purchase one that meets your specific needs and requirements. But perhaps one type of light bars that you should consider but aren't getting much attention is the curved light bar because not many car accessories sellers offer them. Here's what makes this lighting device special.

1. Provides you with wider beam width

A curved light bar has been known to provide drivers with more beam width. Traditional light bars improve their beam spread by using a combination of flood and spot style of illumination. Curved light bars, on the other hand, do this by aiming the LEDs to the sides of your vehicle. They pan the light to the sides more, providing you with a better view of the sides of the road.

2. Offers better darkness penetration

Apart from adding a radius curve and wider beam width to your car's light source, curved light bars make for better darkness penetration. Manufacturers often tune the optics of each LED to make their spot beams more powerful. With spot-tuned LEDs and a curved form for better side illumination, you'll get an LED light bar that can offer you superior road illumination when driving at night.

3. Improves aerodynamics

Traditional light bars add to wind drag, albeit in just smaller amounts. Because curved light bars are "bent" to the sides, they allow air to glide through them, thus, creating better aerodynamics. This can be a great help for those who regularly compete in 4WD touring competitions, where a few seconds can spell the difference between winning and losing.

4. Enhances the look of your car

A light bar with a curve certainly makes your car a stand-out. It accentuates your vehicle's contours and makes it look futuristic. Anyone who has seen your car the first time will definitely take another look to better take in the cool appearance of your vehicle.

If you want an LED light bar Australia can be proud of, be sure to give curved light bars a try. Not only will they give you reliable road illumination, they can make your vehicle look awesome, as well.

Does Your LED Light Bar Pass the Longevity Test

When driving in poorly lit rural areas, it's important to supplement your car's headlights with reliable lighting. This is why many vehicle owners in the remote parts of Australia are equipping their ride with an LED light bar. But with so many types of LED light bars available on the market today, how do you know which one to buy? 

What to Look For in an LED Light Bar

To ensure that your LED lighting device passes the longevity test and will be useful for years to come, ensure that it has the following qualities.

1. Durable

Unless you want to purchase a replacement for your lighting device sooner than expected, look for an LED lighting device that offers optimum durability. For starters, ensure that its housing is tough and not easy to break. Most experts recommend light bars with extruded aluminium housing because these types don't rattle and break into two easily. Also, consider a light bar with PC or polycarbonate lens because they don't get damage easily, providing optimum protection for the LEDs and wiring system inside.

2. High waterproof and dustproof rating

Australia is known for having unforgiving weather. This is why when buying LED light bar in Australia, it's important to choose one with high waterproof and dustproof rating. To ensure that your light bar will survive in the country's driving condition, look for a light with at least IP67 waterproof and dustproof rating so it can be exposed to wet and dusty environments for a longer period of time.

3. Reliable heat dispersal system

Like most lighting devices, LED light bars generate heat. If this heat isn't dispersed properly, it can damage the light bar and shorten its lifespan. This is why it's important to look for an LED light bar equipped with a good heat dispersal system. If you want LED lights that can last a long time, choose those with reliable heat sinks and vents.

4. Quality LED light bulbs

The LED light bulbs are one of the most important components of a 4WD LED bar light. If you want your light bar to produce ultra bright light and at the same time, serve you for years to come, look for a light bar with Cree LEDs. Cree is the leading manufacturer of LED products in the world and their products are proven to last a long time.

To enjoy better road illumination, be sure to pair your LED headlight with top-quality and long-lasting LED light bar.